Repo for the search and displace ingest module that takes odf, docx and pdf and transforms it into .md to be used with search and displace operations
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 

222 lines
8.1 KiB

unit imjcapistd;
{ Original : jcapistd.c ; Copyright (C) 1994-1996, Thomas G. Lane. }
{ This file is part of the Independent JPEG Group's software.
For conditions of distribution and use, see the accompanying README file.
This file contains application interface code for the compression half
of the JPEG library. These are the "standard" API routines that are
used in the normal full-compression case. They are not used by a
transcoding-only application. Note that if an application links in
jpeg_start_compress, it will end up linking in the entire compressor.
We thus must separate this file from jcapimin.c to avoid linking the
whole compression library into a transcoder. }
interface
{$I imjconfig.inc}
uses
imjmorecfg,
imjinclude,
imjdeferr,
imjerror,
imjpeglib,
imjcapimin, imjcinit;
{ Compression initialization.
Before calling this, all parameters and a data destination must be set up.
We require a write_all_tables parameter as a failsafe check when writing
multiple datastreams from the same compression object. Since prior runs
will have left all the tables marked sent_table=TRUE, a subsequent run
would emit an abbreviated stream (no tables) by default. This may be what
is wanted, but for safety's sake it should not be the default behavior:
programmers should have to make a deliberate choice to emit abbreviated
images. Therefore the documentation and examples should encourage people
to pass write_all_tables=TRUE; then it will take active thought to do the
wrong thing. }
{GLOBAL}
procedure jpeg_start_compress (cinfo : j_compress_ptr;
write_all_tables : boolean);
{ Write some scanlines of data to the JPEG compressor.
The return value will be the number of lines actually written.
This should be less than the supplied num_lines only in case that
the data destination module has requested suspension of the compressor,
or if more than image_height scanlines are passed in.
Note: we warn about excess calls to jpeg_write_scanlines() since
this likely signals an application programmer error. However,
excess scanlines passed in the last valid call are *silently* ignored,
so that the application need not adjust num_lines for end-of-image
when using a multiple-scanline buffer. }
{GLOBAL}
function jpeg_write_scanlines (cinfo : j_compress_ptr;
scanlines : JSAMPARRAY;
num_lines : JDIMENSION) : JDIMENSION;
{ Alternate entry point to write raw data.
Processes exactly one iMCU row per call, unless suspended. }
{GLOBAL}
function jpeg_write_raw_data (cinfo : j_compress_ptr;
data : JSAMPIMAGE;
num_lines : JDIMENSION) : JDIMENSION;
implementation
{ Compression initialization.
Before calling this, all parameters and a data destination must be set up.
We require a write_all_tables parameter as a failsafe check when writing
multiple datastreams from the same compression object. Since prior runs
will have left all the tables marked sent_table=TRUE, a subsequent run
would emit an abbreviated stream (no tables) by default. This may be what
is wanted, but for safety's sake it should not be the default behavior:
programmers should have to make a deliberate choice to emit abbreviated
images. Therefore the documentation and examples should encourage people
to pass write_all_tables=TRUE; then it will take active thought to do the
wrong thing. }
{GLOBAL}
procedure jpeg_start_compress (cinfo : j_compress_ptr;
write_all_tables : boolean);
begin
if (cinfo^.global_state <> CSTATE_START) then
ERREXIT1(j_common_ptr(cinfo), JERR_BAD_STATE, cinfo^.global_state);
if (write_all_tables) then
jpeg_suppress_tables(cinfo, FALSE); { mark all tables to be written }
{ (Re)initialize error mgr and destination modules }
cinfo^.err^.reset_error_mgr (j_common_ptr(cinfo));
cinfo^.dest^.init_destination (cinfo);
{ Perform master selection of active modules }
jinit_compress_master(cinfo);
{ Set up for the first pass }
cinfo^.master^.prepare_for_pass (cinfo);
{ Ready for application to drive first pass through jpeg_write_scanlines
or jpeg_write_raw_data. }
cinfo^.next_scanline := 0;
if cinfo^.raw_data_in then
cinfo^.global_state := CSTATE_RAW_OK
else
cinfo^.global_state := CSTATE_SCANNING;
end;
{ Write some scanlines of data to the JPEG compressor.
The return value will be the number of lines actually written.
This should be less than the supplied num_lines only in case that
the data destination module has requested suspension of the compressor,
or if more than image_height scanlines are passed in.
Note: we warn about excess calls to jpeg_write_scanlines() since
this likely signals an application programmer error. However,
excess scanlines passed in the last valid call are *silently* ignored,
so that the application need not adjust num_lines for end-of-image
when using a multiple-scanline buffer. }
{GLOBAL}
function jpeg_write_scanlines (cinfo : j_compress_ptr;
scanlines : JSAMPARRAY;
num_lines : JDIMENSION) : JDIMENSION;
var
row_ctr, rows_left : JDIMENSION;
begin
if (cinfo^.global_state <> CSTATE_SCANNING) then
ERREXIT1(j_common_ptr(cinfo), JERR_BAD_STATE, cinfo^.global_state);
if (cinfo^.next_scanline >= cinfo^.image_height) then
WARNMS(j_common_ptr(cinfo), JWRN_TOO_MUCH_DATA);
{ Call progress monitor hook if present }
if (cinfo^.progress <> NIL) then
begin
cinfo^.progress^.pass_counter := long (cinfo^.next_scanline);
cinfo^.progress^.pass_limit := long (cinfo^.image_height);
cinfo^.progress^.progress_monitor (j_common_ptr(cinfo));
end;
{ Give master control module another chance if this is first call to
jpeg_write_scanlines. This lets output of the frame/scan headers be
delayed so that application can write COM, etc, markers between
jpeg_start_compress and jpeg_write_scanlines. }
if (cinfo^.master^.call_pass_startup) then
cinfo^.master^.pass_startup (cinfo);
{ Ignore any extra scanlines at bottom of image. }
rows_left := cinfo^.image_height - cinfo^.next_scanline;
if (num_lines > rows_left) then
num_lines := rows_left;
row_ctr := 0;
cinfo^.main^.process_data (cinfo, scanlines, {var}row_ctr, num_lines);
Inc(cinfo^.next_scanline, row_ctr);
jpeg_write_scanlines := row_ctr;
end;
{ Alternate entry point to write raw data.
Processes exactly one iMCU row per call, unless suspended. }
{GLOBAL}
function jpeg_write_raw_data (cinfo : j_compress_ptr;
data : JSAMPIMAGE;
num_lines : JDIMENSION) : JDIMENSION;
var
lines_per_iMCU_row : JDIMENSION;
begin
if (cinfo^.global_state <> CSTATE_RAW_OK) then
ERREXIT1(j_common_ptr(cinfo), JERR_BAD_STATE, cinfo^.global_state);
if (cinfo^.next_scanline >= cinfo^.image_height) then
begin
WARNMS(j_common_ptr(cinfo), JWRN_TOO_MUCH_DATA);
jpeg_write_raw_data := 0;
exit;
end;
{ Call progress monitor hook if present }
if (cinfo^.progress <> NIL) then
begin
cinfo^.progress^.pass_counter := long(cinfo^.next_scanline);
cinfo^.progress^.pass_limit := long(cinfo^.image_height);
cinfo^.progress^.progress_monitor (j_common_ptr(cinfo));
end;
{ Give master control module another chance if this is first call to
jpeg_write_raw_data. This lets output of the frame/scan headers be
delayed so that application can write COM, etc, markers between
jpeg_start_compress and jpeg_write_raw_data. }
if (cinfo^.master^.call_pass_startup) then
cinfo^.master^.pass_startup (cinfo);
{ Verify that at least one iMCU row has been passed. }
lines_per_iMCU_row := cinfo^.max_v_samp_factor * DCTSIZE;
if (num_lines < lines_per_iMCU_row) then
ERREXIT(j_common_ptr(cinfo), JERR_BUFFER_SIZE);
{ Directly compress the row. }
if (not cinfo^.coef^.compress_data (cinfo, data)) then
begin
{ If compressor did not consume the whole row, suspend processing. }
jpeg_write_raw_data := 0;
exit;
end;
{ OK, we processed one iMCU row. }
Inc(cinfo^.next_scanline, lines_per_iMCU_row);
jpeg_write_raw_data := lines_per_iMCU_row;
end;
end.