Repo for the search and displace ingest module that takes odf, docx and pdf and transforms it into .md to be used with search and displace operations
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 

895 lines
28 KiB

unit imjdcoefct;
{ This file contains the coefficient buffer controller for decompression.
This controller is the top level of the JPEG decompressor proper.
The coefficient buffer lies between entropy decoding and inverse-DCT steps.
In buffered-image mode, this controller is the interface between
input-oriented processing and output-oriented processing.
Also, the input side (only) is used when reading a file for transcoding. }
{ Original: jdcoefct.c ; Copyright (C) 1994-1997, Thomas G. Lane. }
interface
{$I imjconfig.inc}
uses
imjmorecfg,
imjinclude,
imjdeferr,
imjerror,
imjutils,
imjpeglib;
{GLOBAL}
procedure jinit_d_coef_controller (cinfo : j_decompress_ptr;
need_full_buffer : boolean);
implementation
{ Block smoothing is only applicable for progressive JPEG, so: }
{$ifndef D_PROGRESSIVE_SUPPORTED}
{$undef BLOCK_SMOOTHING_SUPPORTED}
{$endif}
{ Private buffer controller object }
{$ifdef BLOCK_SMOOTHING_SUPPORTED}
const
SAVED_COEFS = 6; { we save coef_bits[0..5] }
type
Latch = array[0..SAVED_COEFS-1] of int;
Latch_ptr = ^Latch;
{$endif}
type
my_coef_ptr = ^my_coef_controller;
my_coef_controller = record
pub : jpeg_d_coef_controller; { public fields }
{ These variables keep track of the current location of the input side. }
{ cinfo^.input_iMCU_row is also used for this. }
MCU_ctr : JDIMENSION; { counts MCUs processed in current row }
MCU_vert_offset : int; { counts MCU rows within iMCU row }
MCU_rows_per_iMCU_row : int; { number of such rows needed }
{ The output side's location is represented by cinfo^.output_iMCU_row. }
{ In single-pass modes, it's sufficient to buffer just one MCU.
We allocate a workspace of D_MAX_BLOCKS_IN_MCU coefficient blocks,
and let the entropy decoder write into that workspace each time.
(On 80x86, the workspace is FAR even though it's not really very big;
this is to keep the module interfaces unchanged when a large coefficient
buffer is necessary.)
In multi-pass modes, this array points to the current MCU's blocks
within the virtual arrays; it is used only by the input side. }
MCU_buffer : array[0..D_MAX_BLOCKS_IN_MCU-1] of JBLOCKROW;
{$ifdef D_MULTISCAN_FILES_SUPPORTED}
{ In multi-pass modes, we need a virtual block array for each component. }
whole_image : jvirt_barray_tbl;
{$endif}
{$ifdef BLOCK_SMOOTHING_SUPPORTED}
{ When doing block smoothing, we latch coefficient Al values here }
coef_bits_latch : Latch_Ptr;
{$endif}
end;
{ Forward declarations }
{METHODDEF}
function decompress_onepass (cinfo : j_decompress_ptr;
output_buf : JSAMPIMAGE) : int; forward;
{$ifdef D_MULTISCAN_FILES_SUPPORTED}
{METHODDEF}
function decompress_data (cinfo : j_decompress_ptr;
output_buf : JSAMPIMAGE) : int; forward;
{$endif}
{$ifdef BLOCK_SMOOTHING_SUPPORTED}
{LOCAL}
function smoothing_ok (cinfo : j_decompress_ptr) : boolean; forward;
{METHODDEF}
function decompress_smooth_data (cinfo : j_decompress_ptr;
output_buf : JSAMPIMAGE) : int; forward;
{$endif}
{LOCAL}
procedure start_iMCU_row (cinfo : j_decompress_ptr);
{ Reset within-iMCU-row counters for a new row (input side) }
var
coef : my_coef_ptr;
begin
coef := my_coef_ptr (cinfo^.coef);
{ In an interleaved scan, an MCU row is the same as an iMCU row.
In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows.
But at the bottom of the image, process only what's left. }
if (cinfo^.comps_in_scan > 1) then
begin
coef^.MCU_rows_per_iMCU_row := 1;
end
else
begin
if (cinfo^.input_iMCU_row < (cinfo^.total_iMCU_rows-1)) then
coef^.MCU_rows_per_iMCU_row := cinfo^.cur_comp_info[0]^.v_samp_factor
else
coef^.MCU_rows_per_iMCU_row := cinfo^.cur_comp_info[0]^.last_row_height;
end;
coef^.MCU_ctr := 0;
coef^.MCU_vert_offset := 0;
end;
{ Initialize for an input processing pass. }
{METHODDEF}
procedure start_input_pass (cinfo : j_decompress_ptr);
begin
cinfo^.input_iMCU_row := 0;
start_iMCU_row(cinfo);
end;
{ Initialize for an output processing pass. }
{METHODDEF}
procedure start_output_pass (cinfo : j_decompress_ptr);
var
coef : my_coef_ptr;
begin
{$ifdef BLOCK_SMOOTHING_SUPPORTED}
coef := my_coef_ptr (cinfo^.coef);
{ If multipass, check to see whether to use block smoothing on this pass }
if (coef^.pub.coef_arrays <> NIL) then
begin
if (cinfo^.do_block_smoothing) and smoothing_ok(cinfo) then
coef^.pub.decompress_data := decompress_smooth_data
else
coef^.pub.decompress_data := decompress_data;
end;
{$endif}
cinfo^.output_iMCU_row := 0;
end;
{ Decompress and return some data in the single-pass case.
Always attempts to emit one fully interleaved MCU row ("iMCU" row).
Input and output must run in lockstep since we have only a one-MCU buffer.
Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED.
NB: output_buf contains a plane for each component in image,
which we index according to the component's SOF position.}
{METHODDEF}
function decompress_onepass (cinfo : j_decompress_ptr;
output_buf : JSAMPIMAGE) : int;
var
coef : my_coef_ptr;
MCU_col_num : JDIMENSION; { index of current MCU within row }
last_MCU_col : JDIMENSION;
last_iMCU_row : JDIMENSION;
blkn, ci, xindex, yindex, yoffset, useful_width : int;
output_ptr : JSAMPARRAY;
start_col, output_col : JDIMENSION;
compptr : jpeg_component_info_ptr;
inverse_DCT : inverse_DCT_method_ptr;
begin
coef := my_coef_ptr (cinfo^.coef);
last_MCU_col := cinfo^.MCUs_per_row - 1;
last_iMCU_row := cinfo^.total_iMCU_rows - 1;
{ Loop to process as much as one whole iMCU row }
for yoffset := coef^.MCU_vert_offset to pred(coef^.MCU_rows_per_iMCU_row) do
begin
for MCU_col_num := coef^.MCU_ctr to last_MCU_col do
begin
{ Try to fetch an MCU. Entropy decoder expects buffer to be zeroed. }
jzero_far( coef^.MCU_buffer[0],
size_t (cinfo^.blocks_in_MCU * SIZEOF(JBLOCK)));
if (not cinfo^.entropy^.decode_mcu (cinfo, coef^.MCU_buffer)) then
begin
{ Suspension forced; update state counters and exit }
coef^.MCU_vert_offset := yoffset;
coef^.MCU_ctr := MCU_col_num;
decompress_onepass := JPEG_SUSPENDED;
exit;
end;
{ Determine where data should go in output_buf and do the IDCT thing.
We skip dummy blocks at the right and bottom edges (but blkn gets
incremented past them!). Note the inner loop relies on having
allocated the MCU_buffer[] blocks sequentially. }
blkn := 0; { index of current DCT block within MCU }
for ci := 0 to pred(cinfo^.comps_in_scan) do
begin
compptr := cinfo^.cur_comp_info[ci];
{ Don't bother to IDCT an uninteresting component. }
if (not compptr^.component_needed) then
begin
Inc(blkn, compptr^.MCU_blocks);
continue;
end;
inverse_DCT := cinfo^.idct^.inverse_DCT[compptr^.component_index];
if (MCU_col_num < last_MCU_col) then
useful_width := compptr^.MCU_width
else
useful_width := compptr^.last_col_width;
output_ptr := JSAMPARRAY(@ output_buf^[compptr^.component_index]^
[yoffset * compptr^.DCT_scaled_size]);
start_col := LongInt(MCU_col_num) * compptr^.MCU_sample_width;
for yindex := 0 to pred(compptr^.MCU_height) do
begin
if (cinfo^.input_iMCU_row < last_iMCU_row) or
(yoffset+yindex < compptr^.last_row_height) then
begin
output_col := start_col;
for xindex := 0 to pred(useful_width) do
begin
inverse_DCT (cinfo, compptr,
JCOEFPTR(coef^.MCU_buffer[blkn+xindex]),
output_ptr, output_col);
Inc(output_col, compptr^.DCT_scaled_size);
end;
end;
Inc(blkn, compptr^.MCU_width);
Inc(JSAMPROW_PTR(output_ptr), compptr^.DCT_scaled_size);
end;
end;
end;
{ Completed an MCU row, but perhaps not an iMCU row }
coef^.MCU_ctr := 0;
end;
{ Completed the iMCU row, advance counters for next one }
Inc(cinfo^.output_iMCU_row);
Inc(cinfo^.input_iMCU_row);
if (cinfo^.input_iMCU_row < cinfo^.total_iMCU_rows) then
begin
start_iMCU_row(cinfo);
decompress_onepass := JPEG_ROW_COMPLETED;
exit;
end;
{ Completed the scan }
cinfo^.inputctl^.finish_input_pass (cinfo);
decompress_onepass := JPEG_SCAN_COMPLETED;
end;
{ Dummy consume-input routine for single-pass operation. }
{METHODDEF}
function dummy_consume_data (cinfo : j_decompress_ptr) : int;
begin
dummy_consume_data := JPEG_SUSPENDED; { Always indicate nothing was done }
end;
{$ifdef D_MULTISCAN_FILES_SUPPORTED}
{ Consume input data and store it in the full-image coefficient buffer.
We read as much as one fully interleaved MCU row ("iMCU" row) per call,
ie, v_samp_factor block rows for each component in the scan.
Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED.}
{METHODDEF}
function consume_data (cinfo : j_decompress_ptr) : int;
var
coef : my_coef_ptr;
MCU_col_num : JDIMENSION; { index of current MCU within row }
blkn, ci, xindex, yindex, yoffset : int;
start_col : JDIMENSION;
buffer : array[0..MAX_COMPS_IN_SCAN-1] of JBLOCKARRAY;
buffer_ptr : JBLOCKROW;
compptr : jpeg_component_info_ptr;
begin
coef := my_coef_ptr (cinfo^.coef);
{ Align the virtual buffers for the components used in this scan. }
for ci := 0 to pred(cinfo^.comps_in_scan) do
begin
compptr := cinfo^.cur_comp_info[ci];
buffer[ci] := cinfo^.mem^.access_virt_barray
(j_common_ptr (cinfo), coef^.whole_image[compptr^.component_index],
LongInt(cinfo^.input_iMCU_row) * compptr^.v_samp_factor,
JDIMENSION (compptr^.v_samp_factor), TRUE);
{ Note: entropy decoder expects buffer to be zeroed,
but this is handled automatically by the memory manager
because we requested a pre-zeroed array. }
end;
{ Loop to process one whole iMCU row }
for yoffset := coef^.MCU_vert_offset to pred(coef^.MCU_rows_per_iMCU_row) do
begin
for MCU_col_num := coef^.MCU_ctr to pred(cinfo^.MCUs_per_row) do
begin
{ Construct list of pointers to DCT blocks belonging to this MCU }
blkn := 0; { index of current DCT block within MCU }
for ci := 0 to pred(cinfo^.comps_in_scan) do
begin
compptr := cinfo^.cur_comp_info[ci];
start_col := LongInt(MCU_col_num) * compptr^.MCU_width;
for yindex := 0 to pred(compptr^.MCU_height) do
begin
buffer_ptr := JBLOCKROW(@ buffer[ci]^[yindex+yoffset]^[start_col]);
for xindex := 0 to pred(compptr^.MCU_width) do
begin
coef^.MCU_buffer[blkn] := buffer_ptr;
Inc(blkn);
Inc(JBLOCK_PTR(buffer_ptr));
end;
end;
end;
{ Try to fetch the MCU. }
if (not cinfo^.entropy^.decode_mcu (cinfo, coef^.MCU_buffer)) then
begin
{ Suspension forced; update state counters and exit }
coef^.MCU_vert_offset := yoffset;
coef^.MCU_ctr := MCU_col_num;
consume_data := JPEG_SUSPENDED;
exit;
end;
end;
{ Completed an MCU row, but perhaps not an iMCU row }
coef^.MCU_ctr := 0;
end;
{ Completed the iMCU row, advance counters for next one }
Inc(cinfo^.input_iMCU_row);
if (cinfo^.input_iMCU_row < cinfo^.total_iMCU_rows) then
begin
start_iMCU_row(cinfo);
consume_data := JPEG_ROW_COMPLETED;
exit;
end;
{ Completed the scan }
cinfo^.inputctl^.finish_input_pass (cinfo);
consume_data := JPEG_SCAN_COMPLETED;
end;
{ Decompress and return some data in the multi-pass case.
Always attempts to emit one fully interleaved MCU row ("iMCU" row).
Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED.
NB: output_buf contains a plane for each component in image. }
{METHODDEF}
function decompress_data (cinfo : j_decompress_ptr;
output_buf : JSAMPIMAGE) : int;
var
coef : my_coef_ptr;
last_iMCU_row : JDIMENSION;
block_num : JDIMENSION;
ci, block_row, block_rows : int;
buffer : JBLOCKARRAY;
buffer_ptr : JBLOCKROW;
output_ptr : JSAMPARRAY;
output_col : JDIMENSION;
compptr : jpeg_component_info_ptr;
inverse_DCT : inverse_DCT_method_ptr;
begin
coef := my_coef_ptr (cinfo^.coef);
last_iMCU_row := cinfo^.total_iMCU_rows - 1;
{ Force some input to be done if we are getting ahead of the input. }
while (cinfo^.input_scan_number < cinfo^.output_scan_number) or
((cinfo^.input_scan_number = cinfo^.output_scan_number) and
(LongInt(cinfo^.input_iMCU_row) <= cinfo^.output_iMCU_row)) do
begin
if (cinfo^.inputctl^.consume_input(cinfo) = JPEG_SUSPENDED) then
begin
decompress_data := JPEG_SUSPENDED;
exit;
end;
end;
{ OK, output from the virtual arrays. }
compptr := jpeg_component_info_ptr(cinfo^.comp_info);
for ci := 0 to pred(cinfo^.num_components) do
begin
{ Don't bother to IDCT an uninteresting component. }
if (not compptr^.component_needed) then
continue;
{ Align the virtual buffer for this component. }
buffer := cinfo^.mem^.access_virt_barray
(j_common_ptr (cinfo), coef^.whole_image[ci],
cinfo^.output_iMCU_row * compptr^.v_samp_factor,
JDIMENSION (compptr^.v_samp_factor), FALSE);
{ Count non-dummy DCT block rows in this iMCU row. }
if (cinfo^.output_iMCU_row < LongInt(last_iMCU_row)) then
block_rows := compptr^.v_samp_factor
else
begin
{ NB: can't use last_row_height here; it is input-side-dependent! }
block_rows := int(LongInt(compptr^.height_in_blocks) mod compptr^.v_samp_factor);
if (block_rows = 0) then
block_rows := compptr^.v_samp_factor;
end;
inverse_DCT := cinfo^.idct^.inverse_DCT[ci];
output_ptr := output_buf^[ci];
{ Loop over all DCT blocks to be processed. }
for block_row := 0 to pred(block_rows) do
begin
buffer_ptr := buffer^[block_row];
output_col := 0;
for block_num := 0 to pred(compptr^.width_in_blocks) do
begin
inverse_DCT (cinfo, compptr, JCOEFPTR (buffer_ptr),
output_ptr, output_col);
Inc(JBLOCK_PTR(buffer_ptr));
Inc(output_col, compptr^.DCT_scaled_size);
end;
Inc(JSAMPROW_PTR(output_ptr), compptr^.DCT_scaled_size);
end;
Inc(compptr);
end;
Inc(cinfo^.output_iMCU_row);
if (cinfo^.output_iMCU_row < LongInt(cinfo^.total_iMCU_rows)) then
begin
decompress_data := JPEG_ROW_COMPLETED;
exit;
end;
decompress_data := JPEG_SCAN_COMPLETED;
end;
{$endif} { D_MULTISCAN_FILES_SUPPORTED }
{$ifdef BLOCK_SMOOTHING_SUPPORTED}
{ This code applies interblock smoothing as described by section K.8
of the JPEG standard: the first 5 AC coefficients are estimated from
the DC values of a DCT block and its 8 neighboring blocks.
We apply smoothing only for progressive JPEG decoding, and only if
the coefficients it can estimate are not yet known to full precision. }
{ Natural-order array positions of the first 5 zigzag-order coefficients }
const
Q01_POS = 1;
Q10_POS = 8;
Q20_POS = 16;
Q11_POS = 9;
Q02_POS = 2;
{ Determine whether block smoothing is applicable and safe.
We also latch the current states of the coef_bits[] entries for the
AC coefficients; otherwise, if the input side of the decompressor
advances into a new scan, we might think the coefficients are known
more accurately than they really are. }
{LOCAL}
function smoothing_ok (cinfo : j_decompress_ptr) : boolean;
var
coef : my_coef_ptr;
smoothing_useful : boolean;
ci, coefi : int;
compptr : jpeg_component_info_ptr;
qtable : JQUANT_TBL_PTR;
coef_bits : coef_bits_ptr;
coef_bits_latch : Latch_Ptr;
begin
coef := my_coef_ptr (cinfo^.coef);
smoothing_useful := FALSE;
if (not cinfo^.progressive_mode) or (cinfo^.coef_bits = NIL) then
begin
smoothing_ok := FALSE;
exit;
end;
{ Allocate latch area if not already done }
if (coef^.coef_bits_latch = NIL) then
coef^.coef_bits_latch := Latch_Ptr(
cinfo^.mem^.alloc_small (j_common_ptr (cinfo), JPOOL_IMAGE,
cinfo^.num_components *
(SAVED_COEFS * SIZEOF(int))) );
coef_bits_latch := (coef^.coef_bits_latch);
compptr := jpeg_component_info_ptr(cinfo^.comp_info);
for ci := 0 to pred(cinfo^.num_components) do
begin
{ All components' quantization values must already be latched. }
qtable := compptr^.quant_table;
if (qtable = NIL) then
begin
smoothing_ok := FALSE;
exit;
end;
{ Verify DC & first 5 AC quantizers are nonzero to avoid zero-divide. }
if (qtable^.quantval[0] = 0) or
(qtable^.quantval[Q01_POS] = 0) or
(qtable^.quantval[Q10_POS] = 0) or
(qtable^.quantval[Q20_POS] = 0) or
(qtable^.quantval[Q11_POS] = 0) or
(qtable^.quantval[Q02_POS] = 0) then
begin
smoothing_ok := FALSE;
exit;
end;
{ DC values must be at least partly known for all components. }
coef_bits := @cinfo^.coef_bits^[ci]; { Nomssi }
if (coef_bits^[0] < 0) then
begin
smoothing_ok := FALSE;
exit;
end;
{ Block smoothing is helpful if some AC coefficients remain inaccurate. }
for coefi := 1 to 5 do
begin
coef_bits_latch^[coefi] := coef_bits^[coefi];
if (coef_bits^[coefi] <> 0) then
smoothing_useful := TRUE;
end;
Inc(coef_bits_latch {SAVED_COEFS});
Inc(compptr);
end;
smoothing_ok := smoothing_useful;
end;
{ Variant of decompress_data for use when doing block smoothing. }
{METHODDEF}
function decompress_smooth_data (cinfo : j_decompress_ptr;
output_buf : JSAMPIMAGE) : int;
var
coef : my_coef_ptr;
last_iMCU_row : JDIMENSION;
block_num, last_block_column : JDIMENSION;
ci, block_row, block_rows, access_rows : int;
buffer : JBLOCKARRAY;
buffer_ptr, prev_block_row, next_block_row : JBLOCKROW;
output_ptr : JSAMPARRAY;
output_col : JDIMENSION;
compptr : jpeg_component_info_ptr;
inverse_DCT : inverse_DCT_method_ptr;
first_row, last_row : boolean;
workspace : JBLOCK;
coef_bits : Latch_Ptr; { coef_bits_ptr; }
quanttbl : JQUANT_TBL_PTR;
Q00,Q01,Q02,Q10,Q11,Q20, num : INT32;
DC1,DC2,DC3,DC4,DC5,DC6,DC7,DC8,DC9 : int;
Al, pred : int;
var
delta : JDIMENSION;
begin
coef := my_coef_ptr (cinfo^.coef);
last_iMCU_row := cinfo^.total_iMCU_rows - 1;
{ Force some input to be done if we are getting ahead of the input. }
while (cinfo^.input_scan_number <= cinfo^.output_scan_number) and
(not cinfo^.inputctl^.eoi_reached) do
begin
if (cinfo^.input_scan_number = cinfo^.output_scan_number) then
begin
{ If input is working on current scan, we ordinarily want it to
have completed the current row. But if input scan is DC,
we want it to keep one row ahead so that next block row's DC
values are up to date. }
if (cinfo^.Ss = 0) then
delta := 1
else
delta := 0;
if (LongInt(cinfo^.input_iMCU_row) > cinfo^.output_iMCU_row+LongInt(delta)) then
break;
end;
if (cinfo^.inputctl^.consume_input(cinfo) = JPEG_SUSPENDED) then
begin
decompress_smooth_data := JPEG_SUSPENDED;
exit;
end;
end;
{ OK, output from the virtual arrays. }
compptr := jpeg_component_info_ptr(cinfo^.comp_info);
for ci := 0 to (cinfo^.num_components-1) do
begin
{ Don't bother to IDCT an uninteresting component. }
if (not compptr^.component_needed) then
continue;
{ Count non-dummy DCT block rows in this iMCU row. }
if (cinfo^.output_iMCU_row < LongInt(last_iMCU_row)) then
begin
block_rows := compptr^.v_samp_factor;
access_rows := block_rows * 2; { this and next iMCU row }
last_row := FALSE;
end
else
begin
{ NB: can't use last_row_height here; it is input-side-dependent! }
block_rows := int (compptr^.height_in_blocks) mod compptr^.v_samp_factor;
if (block_rows = 0) then
block_rows := compptr^.v_samp_factor;
access_rows := block_rows; { this iMCU row only }
last_row := TRUE;
end;
{ Align the virtual buffer for this component. }
if (cinfo^.output_iMCU_row > 0) then
begin
Inc(access_rows, compptr^.v_samp_factor); { prior iMCU row too }
buffer := cinfo^.mem^.access_virt_barray
(j_common_ptr (cinfo), coef^.whole_image[ci],
(cinfo^.output_iMCU_row - 1) * compptr^.v_samp_factor,
JDIMENSION (access_rows), FALSE);
Inc(JBLOCKROW_PTR(buffer), compptr^.v_samp_factor); { point to current iMCU row }
first_row := FALSE;
end
else
begin
buffer := cinfo^.mem^.access_virt_barray
(j_common_ptr (cinfo), coef^.whole_image[ci],
JDIMENSION (0), JDIMENSION (access_rows), FALSE);
first_row := TRUE;
end;
{ Fetch component-dependent info }
coef_bits := coef^.coef_bits_latch;
Inc(coef_bits, ci); { ci * SAVED_COEFS}
quanttbl := compptr^.quant_table;
Q00 := quanttbl^.quantval[0];
Q01 := quanttbl^.quantval[Q01_POS];
Q10 := quanttbl^.quantval[Q10_POS];
Q20 := quanttbl^.quantval[Q20_POS];
Q11 := quanttbl^.quantval[Q11_POS];
Q02 := quanttbl^.quantval[Q02_POS];
inverse_DCT := cinfo^.idct^.inverse_DCT[ci];
output_ptr := output_buf^[ci];
{ Loop over all DCT blocks to be processed. }
for block_row := 0 to (block_rows-1) do
begin
buffer_ptr := buffer^[block_row];
if (first_row) and (block_row = 0) then
prev_block_row := buffer_ptr
else
prev_block_row := buffer^[block_row-1];
if (last_row) and (block_row = block_rows-1) then
next_block_row := buffer_ptr
else
next_block_row := buffer^[block_row+1];
{ We fetch the surrounding DC values using a sliding-register approach.
Initialize all nine here so as to do the right thing on narrow pics.}
DC3 := int(prev_block_row^[0][0]);
DC2 := DC3;
DC1 := DC2;
DC6 := int(buffer_ptr^[0][0]);
DC5 := DC6;
DC4 := DC5;
DC9 := int(next_block_row^[0][0]);
DC8 := DC9;
DC7 := DC8 ;
output_col := 0;
last_block_column := compptr^.width_in_blocks - 1;
for block_num := 0 to last_block_column do
begin
{ Fetch current DCT block into workspace so we can modify it. }
jcopy_block_row(buffer_ptr, JBLOCKROW (@workspace), JDIMENSION(1));
{ Update DC values }
if (block_num < last_block_column) then
begin
DC3 := int (prev_block_row^[1][0]);
DC6 := int (buffer_ptr^[1][0]);
DC9 := int (next_block_row^[1][0]);
end;
{ Compute coefficient estimates per K.8.
An estimate is applied only if coefficient is still zero,
and is not known to be fully accurate. }
{ AC01 }
Al := coef_bits^[1];
if (Al <> 0) and (workspace[1] = 0) then
begin
num := 36 * Q00 * (DC4 - DC6);
if (num >= 0) then
begin
pred := int (((Q01 shl 7) + num) div (Q01 shl 8));
if (Al > 0) and (pred >= (1 shl Al)) then
pred := (1 shl Al)-1;
end
else
begin
pred := int (((Q01 shl 7) - num) div (Q01 shl 8));
if (Al > 0) and (pred >= (1 shl Al)) then
pred := (1 shl Al)-1;
pred := -pred;
end;
workspace[1] := JCOEF (pred);
end;
{ AC10 }
Al := coef_bits^[2];
if (Al <> 0) and (workspace[8] = 0) then
begin
num := 36 * Q00 * (DC2 - DC8);
if (num >= 0) then
begin
pred := int (((Q10 shl 7) + num) div (Q10 shl 8));
if (Al > 0) and (pred >= (1 shl Al)) then
pred := (1 shl Al)-1;
end
else
begin
pred := int (((Q10 shl 7) - num) div (Q10 shl 8));
if (Al > 0) and (pred >= (1 shl Al)) then
pred := (1 shl Al)-1;
pred := -pred;
end;
workspace[8] := JCOEF (pred);
end;
{ AC20 }
Al := coef_bits^[3];
if (Al <> 0) and (workspace[16] = 0) then
begin
num := 9 * Q00 * (DC2 + DC8 - 2*DC5);
if (num >= 0) then
begin
pred := int (((Q20 shl 7) + num) div (Q20 shl 8));
if (Al > 0) and (pred >= (1 shl Al)) then
pred := (1 shl Al)-1;
end
else
begin
pred := int (((Q20 shl 7) - num) div (Q20 shl 8));
if (Al > 0) and (pred >= (1 shl Al)) then
pred := (1 shl Al)-1;
pred := -pred;
end;
workspace[16] := JCOEF (pred);
end;
{ AC11 }
Al := coef_bits^[4];
if (Al <> 0) and (workspace[9] = 0) then
begin
num := 5 * Q00 * (DC1 - DC3 - DC7 + DC9);
if (num >= 0) then
begin
pred := int (((Q11 shl 7) + num) div (Q11 shl 8));
if (Al > 0) and (pred >= (1 shl Al)) then
pred := (1 shl Al)-1;
end
else
begin
pred := int (((Q11 shl 7) - num) div (Q11 shl 8));
if (Al > 0) and (pred >= (1 shl Al)) then
pred := (1 shl Al)-1;
pred := -pred;
end;
workspace[9] := JCOEF (pred);
end;
{ AC02 }
Al := coef_bits^[5];
if (Al <> 0) and (workspace[2] = 0) then
begin
num := 9 * Q00 * (DC4 + DC6 - 2*DC5);
if (num >= 0) then
begin
pred := int (((Q02 shl 7) + num) div (Q02 shl 8));
if (Al > 0) and (pred >= (1 shl Al)) then
pred := (1 shl Al)-1;
end
else
begin
pred := int (((Q02 shl 7) - num) div (Q02 shl 8));
if (Al > 0) and (pred >= (1 shl Al)) then
pred := (1 shl Al)-1;
pred := -pred;
end;
workspace[2] := JCOEF (pred);
end;
{ OK, do the IDCT }
inverse_DCT (cinfo, compptr, JCOEFPTR (@workspace),
output_ptr, output_col);
{ Advance for next column }
DC1 := DC2; DC2 := DC3;
DC4 := DC5; DC5 := DC6;
DC7 := DC8; DC8 := DC9;
Inc(JBLOCK_PTR(buffer_ptr));
Inc(JBLOCK_PTR(prev_block_row));
Inc(JBLOCK_PTR(next_block_row));
Inc(output_col, compptr^.DCT_scaled_size);
end;
Inc(JSAMPROW_PTR(output_ptr), compptr^.DCT_scaled_size);
end;
Inc(compptr);
end;
Inc(cinfo^.output_iMCU_row);
if (cinfo^.output_iMCU_row < LongInt(cinfo^.total_iMCU_rows)) then
begin
decompress_smooth_data := JPEG_ROW_COMPLETED;
exit;
end;
decompress_smooth_data := JPEG_SCAN_COMPLETED;
end;
{$endif} { BLOCK_SMOOTHING_SUPPORTED }
{ Initialize coefficient buffer controller. }
{GLOBAL}
procedure jinit_d_coef_controller (cinfo : j_decompress_ptr;
need_full_buffer : boolean);
var
coef : my_coef_ptr;
{$ifdef D_MULTISCAN_FILES_SUPPORTED}
var
ci, access_rows : int;
compptr : jpeg_component_info_ptr;
{$endif}
var
buffer : JBLOCK_PTR;
i : int;
begin
coef := my_coef_ptr(
cinfo^.mem^.alloc_small (j_common_ptr (cinfo), JPOOL_IMAGE,
SIZEOF(my_coef_controller)) );
cinfo^.coef := jpeg_d_coef_controller_ptr(coef);
coef^.pub.start_input_pass := start_input_pass;
coef^.pub.start_output_pass := start_output_pass;
{$ifdef BLOCK_SMOOTHING_SUPPORTED}
coef^.coef_bits_latch := NIL;
{$endif}
{ Create the coefficient buffer. }
if (need_full_buffer) then
begin
{$ifdef D_MULTISCAN_FILES_SUPPORTED}
{ Allocate a full-image virtual array for each component, }
{ padded to a multiple of samp_factor DCT blocks in each direction. }
{ Note we ask for a pre-zeroed array. }
compptr := jpeg_component_info_ptr(cinfo^.comp_info);
for ci := 0 to pred(cinfo^.num_components) do
begin
access_rows := compptr^.v_samp_factor;
{$ifdef BLOCK_SMOOTHING_SUPPORTED}
{ If block smoothing could be used, need a bigger window }
if (cinfo^.progressive_mode) then
access_rows := access_rows * 3;
{$endif}
coef^.whole_image[ci] := cinfo^.mem^.request_virt_barray
(j_common_ptr (cinfo), JPOOL_IMAGE, TRUE,
JDIMENSION (jround_up( long(compptr^.width_in_blocks),
long(compptr^.h_samp_factor) )),
JDIMENSION (jround_up( long(compptr^.height_in_blocks),
long(compptr^.v_samp_factor) )),
JDIMENSION (access_rows));
Inc(compptr);
end;
coef^.pub.consume_data := consume_data;
coef^.pub.decompress_data := decompress_data;
coef^.pub.coef_arrays := @(coef^.whole_image);
{ link to virtual arrays }
{$else}
ERREXIT(j_common_ptr(cinfo), JERR_NOT_COMPILED);
{$endif}
end
else
begin
{ We only need a single-MCU buffer. }
buffer := JBLOCK_PTR (
cinfo^.mem^.alloc_large (j_common_ptr (cinfo), JPOOL_IMAGE,
D_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)) );
for i := 0 to pred(D_MAX_BLOCKS_IN_MCU) do
begin
coef^.MCU_buffer[i] := JBLOCKROW(buffer);
Inc(buffer);
end;
coef^.pub.consume_data := dummy_consume_data;
coef^.pub.decompress_data := decompress_onepass;
coef^.pub.coef_arrays := NIL; { flag for no virtual arrays }
end;
end;
end.